University of Illinois at Urbana-Champaign
The Grainger College of Engineering
Materials Science & Engineering

Waltraud M Kriven

Waltraud M Kriven
Waltraud M Kriven
Donald Biggar Willett Professor
(217) 333-5258
105 Materials Science & Eng Bld

For More Information

Biography

Waltraud M. Kriven received a Ph.D in Solid State Chemistry from the University of Adelaide in South Australia. The B.Sc. (Hons) and Baccalaureate degrees were in Physical and Inorganic Chemistry, and Biochemistry, also in Adelaide. Dr. Kriven spent one year as a Post Doctoral Teaching and Research Fellow in the Chemistry Dept. at the University of Western Ontario in Canada. She then spent three years jointly at the University of California at Berkeley, and at the Lawrence Berkeley Laboratory. There, Dr. Kriven conducted post-doctoral research in transmission electron microscopy of ceramics and was a Lecturer, teaching Phase Equilibria in the senior undergraduate Ceramics Program of the Dept. of Materials Science and Mineral Engineering. For almost four years. Dr. Kriven was a Visiting Scientist at the Max-Planck-Institute in Stuttgart, Germany. There she studied the mechanism of transformation toughening of composite ceramics by 1 MeV HVEM, while working in the electron microscopy group headed by Dr. M. Rühle. Since then, Professor Kriven has been at the University of Illinois at Urbana-Champaign, USA. She is a Full Professor and has held joint faculty positions in the Materials Research Laboratory (initially) and the Department of Materials Science and Engineering. She is also an Affiliate Professor in the Department of Mechanical Science and Engineering at the University of Illinois at Urbana-Champaign.

Professor Kriven has internationally recognized expertise in the areas of phase transformations in inorganic compounds and their applications in structural ceramic composites, geopolymers, and low temperature synthesis of oxide ceramic powders. In addition she has made extensive contributions to oxide composites design, microstructure characterization by electron microscopy techniques and phase equilibria. The Kriven group has developed an in situ, hot stage (up to 2000°C) synchrotron furnace for studies of ceramics in air. Kriven has produced 340 research publications, 59 conference proceedings, edited or co-edited 27 books and 6 patents.

Professor Kriven has been elected as a member of the European Union Academy of Sciences (2020), an Academician in the World Academy of Ceramics (2005), Fellow of the American Ceramic Society (1995) and Fellow of the Australian Ceramic Society (2009). She has won the Mueller Award (2017) from the Engineering Division of the American Ceramic Society for her research in ceramics. She was awarded the Brunauer Award twice (in 1988 and 1991) from the American Ceramic Society for co-authoring the best research papers of the year. Six US patents have been granted for her research with a further four in progress. Professor Kriven was a Past-Chair and Counselor to the Engineering Ceramics Division of the American Ceramic Society and Symposium Organizer of the Focused session on Geopolymers at the ACERS Annual Meetings, the Cocoa Beach and Daytona Beach Conferences and Expositions on Advanced Ceramics and Composites from 2003 to 2021. She has been the co-organizer on 22 international conferences on geopolymers, and was a co-organizer of 10 Int. Symposiium on Phase Transformations in Ceramics: Science and Applications held annually (2013-2023) at MS&T conferences in USA. Prof. Kriven organizes 3-4 international conferences per year on geopolymers and phase transformations in ceramics. Kriven started her company, Keanetech, LLC in 2004 which is affiliated with the University of Illinois at Urbana-Champaign Enterprise Works. It is a technology transition company specializing in ceramics and geopolymers.

Documents

Major Consulting Activities

  • US Army Corps of Engineers - Construction Engineering Research Laboratory (CERL) 2013 - present

Research Areas

  • Ceramics

Research Topics

Chapters in Books

  • “Geopolymer-based Composites,” W. M. Kriven, in Vol. 5, Ceramics and Carbon Matrix Composites, edited by Marina Ruggles-Wrenn. Part of an 8 volume set of books entitled Comprehensive Composite Materials II, Peter Beaumont and Carl Zweben, Co-editors-in-chief. Published by Elsevier, Oxford, UK,(2018).
  • "Phase Transformations in Rare Earth Niobates," W. M. Kriven, P. Sarin and L. F. Siah, Solid → Solid Phase Transformations in Inorganic Materials ‘05. Edited by J. M. Howe, D. E. Laughlin, J. K. Lee, D. J. Srolovitz and U. Dahmen. Published by the TMS Society, 1023-1028 (2006).
  • "High Temperature Phase Transformations in Dysprosium Titanate," W. M. Kriven, K. Jurkschat and L.-F. Siah, Solid →Solid Phase Transformations in Inorganic Materials ‘05. Edited by J. M. Howe, D. E. Laughlin, J. K. Lee, D. J. Srolovitz and U. Dahmen. Published by the TMS Society, 1015-1022 (2006).
  • "Instrinsic Microstructure of Geopolymers and Geopolymer-based Materials," W. M. Kriven, J. Bell, M. Gordon and Gianguo Wen, in "Geopolymer, Green Chemistry and Sustainable Development Solutions," edited by Joseph Davidovits. Proc. World Congress Geopolymer, 2005, St. Quentin, France. Published by the Geopolymer Institute, St. Quentin, France, pp 179-183 (2005).
  • "SOFC Powder Synthesis by the Organic Steric Entrapment Method," W. M. Kriven and B. R. Rosczyk, "Fuel Cell Technologies: State and Perspectives." Edited by N. Sammes, A. Smirnova and O. Vasylyvev. Kluver Academic Publishers, Dordrecht, The Netherlands. pp. 381-394 (2005).
  • "Thermal Expansion and Phase Transitions up to 850°C of a Celsian-Hexacelsian (BaAl2Si2O8) Mixture," J. Schneider and W. M. Kriven, in High Temperature Ceramic Materials, edited by W. Krenkel, R. Naslain and H. Schneider, Wiley-VCH Weinheim, Germany, pp 257-261 (2001).
  • "The Preparation and Characterization of Alumina-Leucite (KAlSi2O6) Composites," D.-K. Kim, J. L. Shull and W M. Kriven, Ceramic Transactions, 103, 63-73 (2000). In Advances in Ceramic Matrix Composites V, edited by N. P. Bansal, J. P. Singh and E. Ustundag.
  • "High Temperature Phase Transformation in Y4Al209, Gd4Al209 and Dy4Al209," W. M. Kriven, J. L. Shull, W. D. Porter and C. A. Hubbard. In "Solid →Solid Phase Transformations in Inorganic Materials '94," 95-100 (1994).
  • "Chemically Bonded Ceramics as an Alternative to High Temperature Composite Processing," M. A. Gülgün, B.R. Johnson and W. M. Kriven, in "Better Ceramics Through Chemistry VI." Edited by C. Sanchez, C. J. Brinker, M. L. MecCartney and A. K. Cheetham. Publ. by Materials Research Society, Pittsburgh, vol 346, 511-516 (1994).
  • "High Temperature Transformation Toughening of Magnesia by Terbia," P. D. Jero and W. M. Kriven, in Science and Technology of Zirconia V. Technomic Publishing Company, 190-197 (1993).
  • "Kinetics and Crystallography of the Monoclinic (B) to Cubic (C) Transformation in Dysprosia," O. Sudre, K. R. Venkatachari and W. M. Kriven, in "Science and Technology of Zirconia V." Technomic Publishing Company, pp 180-189 (1993).
  • "In Situ Transmission Electron Microscopy (TEM) Investigation of Fracture Mechanisms in a Calcium Aluminate MDF Cement," O. O. Popoola, W. M. Kriven and J. F. Young, in Advanced Cementitious Systems: Mechanisms and Properties, edited by F. P. Glasser, P. L. Pratt, T. O. Mason, J. F. Young and G. J. McCarthy. Publ. by Materials Research Society, Pittsburgh, vol 245, 283-288, (1992).
  • "Preparation and Hydration Kinetics of Pure CaAl2O4," M. A. Gulgun, I. Nettleship, O. O. Popoola, W. M. Kriven and J. F. Young, in "Advanced Cementitious Systems: Mechanisms and Properties," edited by F. P. Glasser, P. L. Pratt, T. O. Mason, J. F. Young and G. J. McCarthy. Publ. by Materials Research Society, Pittsburgh, vol 245, 199-204, (1992).
  • "Anodic Spark Deposition - A Novel Approach to Ceramic Coatings," S. D. Brown, G. P. Wirtz and W. M. Kriven, High Performance Ceramic Films and Coatings, Edited by P. Vincenti, Elsevier Science Publishers, Amsterdam, The Netherlands. Materials Science Monographs 67, 221-232, (1991).
  • "Microstructure and Wear Characterization of Self-Lubricating Al2O3-MoS2 Composite Ceramic Coatings," K. A. Koshkarian and W. M. Kriven, in "New Materials Approaches to Tribology: Theory and Applications." Edited by L. E. Pope, L. E. Fehrenbacher, W. O. Winet. Publ. by Materials Research Society, Pittsburgh, vol 140, pp. 369-376 (1989).
  • "Effect of High Temperature Oxidation on the Microstructure and Mechanical Properties of Whisker-Reinforced Ceramics," W. M. Kriven, G. Van Tenderloo, T. N. Tiegs and P. F. Becher, Ceramic Microstructures 86: Role of Interfaces, Plenum Press Publ. Edited by J. A. Pask and A. G. Evans, Berkeley, 939-947 (1987).
  • "Displacive Transformation Mechanisms in Zirconia Ceramics and Other Non-Metals," W. M. Kriven, in Tailoring Multiphase and Composite Ceramics. Edited by R. E. Tressler, G. L. Messing, C. G. Pantano and R. E. Newnham, Plenum Press, 223-237 (1986).
  • "The Influence of Grain Boundary Silica Impurity on Alumina Toughness," J. S. Moya, W. M. Kriven and J. A. Pask, Surfaces and Interfaces in Ceramic and Ceramic-Metal Systems. Edited by J. A. Pask and A. G. Evans, Berkeley, 317-322 (1980).

Selected Articles in Journals

  • “Mechanical Behavior of K-geopolymers Reinforced with Silane-coated Basalt Fibers,” Ana Carolina Constâncio Trindade, Flávio de Andrade Silva and Waltraud M. Kriven, J. Am. Ceram. Soc., 104, 437–447. (2021).
  • “Directions of Zero Thermal Expansion and the Peritectic Transformation in HfTiO4”, Scott J. McCormack, William A. Wheeler, Benjamin S. Hulbert and Waltraud M. Kriven, Acta Materialia, 200[11] 187-199 (2020)
  • “Mechanical Properties and Characterization of Alumina Platelet Reinforced Geopolymer Composites,” Gregory P. Kutyla and Waltraud M. Kriven, J. Am. Ceram. Soc., (2020). 2020;00:1–8.
  • “High Entropy Stabilized Lanthanide Sesquioxide,” Kuo-Pin Tseng, Qun Yang, Scott J. Mc Cormack and Waltraud M. Kriven, J. Am. Ceram Soc., 103 [1] 569–576 (2020).
  • "Influence of Pore Structure on the Strength Behavior of Particle- and Fiber-reinforced, Metakaolin-based Geopolymer Composites,” Ange-Therese Akono, Seid Koric and Waltraud M. Kriven, Cement and Concrete Composites, 104 No. 103361 (2019)
  • “Development of Mechanical Properties in Dental Resin Composite: Effect of Filler Size and Filler Aggregation State,” Henry A. Rodriquez, Waltraud M. Kriven and Herley Casanova, Materials Science and Engineering Materials Science and Engineering C, 101 [8] 274-282 (2019).
  • “Formation of α/β-Si3N4 Nanoparticles by Carbothermal Reduction and Nitridation of Geopolymers,” Cengiz Bagci, Qun Yang and Waltraud M. Kriven, J. Am. Ceram. Soc., 102 [11] 6542-6551 (2019).
  • Alpha-alumina and Spinel React into Single Phase High-alumina Spinel in
  • “Amazonian Metakaolin Reactivity for Geopolymer Synthesis,” Ruy A. Sá Ribeiro, Marilene G. Sá Ribeiro, Gregory P. Kutyla and Waltraud M. Kriven. Advances in Materials Science and Engineering, Vol (2019) Article ID 8950764.
  • “Temperature Gradients for Thermophysical and Thermochemical Property Measurements to 3000 ˚C for an Aerodynamically Levitated Spheroid,” Scott J. McCormack, Richard Weber, Anthony Tamalonis and Waltraud M. Kriven, Review of Scientific Instruments, 90 [1] (2019)
  • “Reply to Comments on “In-situ Determination of the HfO2-Ta2O5 Temperature Phase Diagram up to 3000 ˚C”,” Scott J. Mc Cormack, Kuo-Pin Tseng, Richard Weber, Denys Kapush, Alexandra Navrotsky and Waltraud M. Kriven. J. Am. Ceram. Soc., 102 [11] 7028-7030 (2019).
  • “In situ Determination of the HfO2-Ta2O5 Temperature Phase Space up to 3000°C,” Scott J. Mc Cormack, Kuo-Pin Tseng, Richard Weber, Denys Kapush, Alexandra Navrotsky and Waltraud M. Kriven. J. Am. Ceram. Soc., 102 [8] 4848-4861 (2019).
  • “In-situ Investigation of Hf6Ta2O17 Anisotropic Thermal Expansion and Topotactic, Peritectic Transformation,” Scott J. McCormack, Richard Weber and Waltraud M. Kriven, Act Materialia 161 127 – 137 (2018).
  • “Crystal Structure Solution for the A6B2O17 (A = Zr, Hf | B = Nb, Ta) Superstructure”, Scott J. McCormack and Waltraud M. Kriven, Acta Cryst B75, 227-234 (2019).
  • “Sodium Silicate Activated Slag - Fly Ash Binders: Part III – Composition of Soft Gel and Calorimetry,” Kaushik Sankar, Peter Stynoski and Waltraud M. Kriven, J. Am. Ceram. Soc., 102 3175-3190 (2019).
  • “Slag-Fly Ash and Slag-Metakaolin Binders: Part II – Properties of Precursors and NMR Study of Poorly-Ordered Phases”, Kaushik Sankar, Andre Sutrisno and Waltraud M. Kriven, J. Am. Ceram. Soc., 102 3204-3227.
  • “Sodium Silicate Activated Slag - Fly Ash Binders: Part I – Processing, Microstructure and Mechanical Properties,” Kaushik Sankar, Peter Stynoski, Ghassan K. Al-Chaar and Waltraud M. Kriven, J. Am. Ceram. Soc., 101 [6] 2228-2244 (2017).
  • “In-situ Measurements of Lattice Expansion Related to Defect Generation During Flash Sintering,” J. -M. Lebrun, C. S. Hellberg, S. K. Jha, W. M. Kriven, A. Steveson, K. S. Seymour, N. Bernstein, S. C. Erwin and R. Raj, J. Am. Ceram. Soc, J. Am. Ceram. Soc., Rapid Communication 100 [11] 4965-4970 (2017). https://doi:10.1111/jace.15071
  • “A Review of Particle- and Fiber-Reinforced Metakaolin-Based Geopolymer Composites,” Ruy A. Sa Ribeiro, Marilene G. Sa Ribeiro and Waltraud M. Kriven, J. Ceramic Science and Technology, 8 [3] 307-322 (2017).
  • “Fully Reacted and High Strength Geopolymer Made of Diatomite as a Fumed Silica Alternative,” Cengiz Bagci, Gregory P. Kutyla and Waltraud M. Kriven, Ceramics International 43 [17] 14784 - 14790 (2017).
  • Q. Yang, K. Kalathiparambil, D. T. Elg, D. Ruzic and W. M. Kriven, “Microstructural Damage of Alpha-Al2O3 by High Energy Density Plasma and Impurities,” Acta Materialia, vol 132 pp 479-490 (2017).
  • Kaushik Sankar and Waltraud M. Kriven, “Geopolymer Reinforced with E-Glass Leno Weaves,” J. Am. Ceram. Soc., 100 [6] 2492-2501 (2017).
  • Ruy A. Sa Ribeiro, Marilene G. Sa Ribeiro, Kaushik Sankar and Waltraud, Potassium-based Geopolymer Reinforced with Bamboo Fibers,” J. Am. Ceram. Soc., 100 [1] 49-55 (2017).
  • Ruy A. Sa Ribeiro, Marilene G. Sa Ribeiro, Kaushik Sankar and Waltraud M. Kriven, “Geopolymer-Bamboo Composite – a Novel Sustainable Construction Material,” Construction and Building Materials, 123 [10] 501-507 (2016).
  • Kevin C. Seymour, Daniel Ribero, Scott J. McCormack and Waltraud M. Kriven, “Relationship between the Orthorhombic and Hexagonal Phases in Dy2TiO5,” J. Am. Ceram. Soc., 99 [11] 3739–3744 (2016).
  • Jean-Marie Lebrun, Shikhar K. Jha, Scott J. McCormack, Waltraud M. Kriven and Rishi Raj, “Broadening of Diffraction Peak Widths and Temperature Non-uniformity during Flash Experiments,” J. Am. Ceram. Soc., 99 [7] 2521–2530 (2016).
  • Cengiz Bagci, Gregory P. Kutyla, Kevin C. Seymour and Waltraud M. Kriven, “Synthesis and Characterization of Silicon Carbide Powders Converted from Metakaolin-based Geopolymers,” J. Am. Ceram. Soc., 99 [7] 2521–2530 (2016).
  • Daniel R. Ribero and Waltraud M. Kriven, “Properties of Geopolymer Composites Reinforced with Basalt Chopped Strand Mat or Woven Fabric,” J. Am. Ceram. Soc., 99 [4] 1192-1199 (2015).
  • Arik Avagyan, David Chiao, Nathan Dostart, Kaiyuan Zhu, Shinhu Cho, Kevin Remick, Alexander F. Vakakis, D. Michael McFarland and Waltraud M. Kriven, "Experimental Study of Embedded-in-Matrix and Non-Embedded Ordered Granular Chains Under Impulsive Excitation," Int. Acta Mechanica 227 [9] 2511-2527 (2016).
  • S. K. Jha, J. M. Lebrun, K. C. Seymour, W. M. Kriven and R. Raj, “Electric Field Induced Texture in Titania During Experiments Related to Flash Sintering,” Communication to the J. European Ceramic Society, 36 257-261 (2016).
  • Daniel Ribero, Kevin C. Seymour and Waltraud M. Kriven, “Synthesis of NaTi2(PO4)3 by the Organic Entrapment Method and its Thermal Expansion Behavior,” J. Am. Ceram. Soc., 99 [11] 3586- 3593 (2016)
  • Thomas A. Carlson, Charles R. Welch, Waltraud M. Kriven, and Charles P. Marsh, "Effects of Time, Temperature, and Pressure on the Microstructure of Spark Plasma Sintered Silicon Carbide," Journal of Ceramic Processing Research, 16 [3] 303-307 (2015).
  • Kevin C. Seymour, Robert W. Hughes and Waltraud M. Kriven, "Thermal Expansion of the Orthorhombic Phase in the Ln2TiO5 System," J. Am. Ceram. Soc., 98 4096–4101 (2015).
  • Christian J. Espinoza Santos, Arif Nelson, Elena Mendoza, Randy Ewoldt and Waltraud M. Kriven, "Design and Fabrication of Spherical Ceramic Beads by the Vibration Method," J. European Ceram. Soc., 35 [13] 3587-3594 (2015).
  • Brayden E. Glad and Waltraud M. Kriven, "Highly Porous Geopolymers Through Templating and Surface Interactions," J. Am. Ceram. Soc. 98 [7] 2052-2059 (2015).
  • D. Ribero and W. M. Kriven, "Synthesis of LiFePO4 Powder by the Organic-Inorganic Steric Entrapment Method," J. Materials Research, 30 [14] 2133-2143 (2015).
  • A. Zhuravleva, A. Lindsey, B. Chakoumakos, R. Custelcean, F. Meilleur, R. W. Hughes, W. M. Kriven and C. L. Melcher, "Crystal Structure and Thermal Expansion of a CsCe2Cl7 Scintillator," J. Solid State Chemistry, 227 142-149 (2015).
  • Kevin R. Tolman, R. Ubic, Meagan Papac, Kevin C. Seymour, Scott J. McCormack, Waltraud M. Kriven and Hans Kungl, "Structural Effect of Aliovalent Doping in Lead Perovskites," J. Solid State Chemistry, 225 359-367 (2015).
  • P. Sarin, V. L. Snoeyink, D. E. Hay, and W. M. Kriven, “X-ray Microdiffraction Studies on Iron Corrosion Scales from Corroded Drinking Water Distribution Pipes,” for Journal of Water Supply Research and Technology – AQUA (2014).
  • Jean-Marie Lebrun, Timothey G. Morrissey, John S. C. Francis, Kevin C. Seymour, Waltraud M. Kriven and Rishi Raj, "Emergence and Extinction of a New Phase During On-Off Experiments Related to Flash Sintering of 3Y-TZP," J. Am. Ceram. Soc., 98 [5] 1493-1497 (2015)
  • K. C. Seymour and W. M. Kriven, “Synthesis and Thermal Expansion of β-Eucryptite Powders Produced by the Inorganic-Organic Steric Entrapment Method,” J. Am. Ceram. Soc., 97[10], 3087-3091 (2014).
  • Pathikumar Sellappan, Erheng Wang, Christian J. Espinoza Santos, Tommy On, John Lambros and Waltraud M. Kriven, "Wave propagation through alumina-porous alumina laminates," J. Europ. Ceram. Soc., 35 197-210 (2014).
  • M. Arif Hasan, Shinhu Cho, Kevin Remick and Alexander F. Vakakis, D. Michael McFarland and Waltraud M. Kriven, "Experimental Study of Nonlinear Acoustic Bands and pPopagating Breathers in Ordered Granular Media Embedded in Matrix," Granular Matter, 17[1], 49-72 (2014).
  • Jin H. Lee, Andrew S. Madden, Waltraud M. Kriven and A. Cuneyt Tas, “Synthetic Aragonite (CaCO3) as a Potential Additive in Calcium Phosphate Cements: First Evaluation in a Tris-free SBF at 37°C,” J. Am. Ceram. Soc., 97[10], 3052-3061 (2014).
  • Pankaj Sarin, Robert W. Hughes, Daniel R. Lowry, Zlatomir D. Apostolov and Waltraud M. Kriven, "High Temperature Properties and Ferroelastic Phase Transitions in Rare-earth Niobates," J. Am. Ceram. Soc. 97[10], 3307-3319 (2014).
  • R.P. Haggerty, P. Sarin, Z.D. Apostolov, P.E. Driemeyer and W.M. Kriven, "The Thermal Expansion of HfO2 and ZrO2," J. Am. Ceram. Soc., 97 [7] 2213-2222 (2014).
  • Steven P. Letourneau, Zhen Zhen, Josh Owens, Kevin Tolman, Rick Ubic and Waltraud M. Kriven, “Lattice Constant Prediction of Defective Rare Earth Titanate Perovskites,” J. Solid State Chemistry, 219 99-107 (2014).
  • Guillaume F. Nataf, Pedro O. Castillo-Villa, Pathikumar Sellappan, Waltraud M. Kriven, Eduard Vives, Antoni Planes and Ekhard K. H. Salje, “Predicting Failure: Acoustic Emission of Berlinite under Compression,” J. Physics: Condensed Matter, 26[27], 275401 (9 pp) (2014).
  • Z. D. Apostolov, P. Sarin, R. W. Hughes and W. M. Kriven, “Thermal Expansion of Ln6WO12 (Ln = Y, Ho, Er, Yb) and Ln2WO6 (Ln = Gd, Dy, Ho) - an In Situ Synchrotron X-ray Diffraction Study,” J. Am. Ceram. Soc., 97 [8] 2496-2505 (2014).
  • M.V. Pachuilo, F. Stefani, L.L. Raja, R.D. Bengston, G.A. Henkelman, A.C. Tas and W.M. Kriven, "Development of a Gas-fed Capillary Source for Pulsed High-Density Plasma Applications," IEEE Transactions on Plasma Science, 42[10], 3245-3252 (2014).
  • Samuel Shian, Pankaj Sarin, Mary Gurak, Mor Baram, Waltraud M. Kriven and David R. Clarke, "The Tetragonal - Monoclinic, Ferroelastic Transformation in Yttrium Tantalate and Effect of Zirconia Alloying," Acta Materialia, 69 196-202 (2014).
  • S.S. Musil and W.M. Kriven, "In Situ Mechanical Properties of Chamotte Particulate Reinforced, Potassium Geopolymer," J. Am. Cer. Soc., 97(3) 907-915 (2014).
  • Z.D. Apostolov, P. Sarin, R.W. Hughes and W.M. Kriven, "In Situ Synchrotron X-Ray Diffraction Study of the Rhombohedral to HT-Cubic Phase Transformation in Ln6WO12 where Ln = Y, Ho, Er, Yb," J. Am. Ceram. Soc., 97(4), 1256-1263 (2014).
  • B.E. Glad and W.M. Kriven, "Geopolymer with Hydrogel Characteristics via Silane Coupling Agent Additives," J. Am. Ceram. Soc., 97(1), 295-304 (2014).
  • C. J. Espinoza Santos, T.-S. Wei, B. Cho and W.M.. Kriven, "A Forming Technique to Produce Spherical Ceramic Beads using Sodium Alginate as a Precursor Binder Phase," J. Am. Ceram. Soc., 96(11) 3643-3649 (2013).
  • B.E. Glad and W.M. Kriven, "Optimization of Gas Adsorption Porosimetry for Geopolymer Analysis," J. Am. Ceram. Soc., 96(11) 3643-3649 (2013).
  • R. Ubic, K. Tolman, K.-F. Chan, N. Lundy, S. Letourneau, W.M. Kriven, "The Effective Size of Vacancies in Aliovalently Doped SrTiO3 Perovskites," J. Alloys and Compounds, 575, 239-245 (2013).
  • M.A. Hasan, S.-H. Cho, K. Remick, A.F. Vakakis, D.M. McFarland and W.M. Kriven, "Primary Pulse Transmission in Coupled Steel Granular Chains Embedded in PDMS Matrix: Experiment and Modeling," International Journal of Solids and Structures, 50(20-21), 3207-3224 (2013).
  • P.O. Castillo-Villa, J. Baro, A. Planes, E.K.H. Salje, P. Sellappan, W.M. Kriven and E. Vives, "Crackling Noise During Failure of Alumina Under Compression: Effect of Porosity,” J. Physics: Condensed Matter, 25 292202 (2013).
  • O. Garcia-Moreno, W.M. Kriven, J.S. Moya, R. Torrecillas, "Alumina Region of the Lithium Aluminosilicate System: a New Window for Temperature Ultrastable Materials Design," J. Am. Ceram. Soc. Communication 96(7), 2039-2041 (2013)
  • Z.A. Jones, P. Sarin, R.P. Haggerty and W.M. Kriven, "CTEAS: A Graphical-User-Interface-Based Program to Determine Thermal Expansion from High-Temperature X-Ray Diffraction," J. Applied Crystallography, 46, 550-553 Part: 2 (2013).
  • J. Angelkort, P. Sarin, Z.D. Apostolov, Z.A. Jones and W.M. Kriven, "Thermal Properties and Phase Transition of 2ZrO2•P2O5 Studied by In Situ, X-ray Synchrotron Diffraction,” J. Amer. Ceramic Soc., 96(4), 1292-1299 (2013).
  • Z.D. Apostolov, P. Sarin, R.P. Haggerty and W.M. Kriven, "In-situ Synchrotron X-ray Diffraction Study of the Cubic to Rhombohedral Phase Transformation in Ln6WO12 (Ln = Y, Ho, Er, Yb)," J. Amer. Ceramic Soc. 96(3), 987-994 (2013).
  • B.E. Glad, C. Han and W.M. Kriven, "Polymer Adhesion to Geopolymer via Silane Coupling Agent Additives," J. American Ceramic Society, 95(12) 3758-3762 (2012).
  • A. Ozer, W.M. Kriven and Y.K. Tur, "The Effect of 3 mol% Y2O3 Stabilized ZrO2 Produced by a Steric Entrapment Method on the Mechanical and Sintering Properties of Cr3C2 Based Cermets," Mater. Sci. and Eng. A, 556, 878-884 (2012).
  • S-J. Lee, J-Y. Kwak and W. M. Kriven, "Effect of a Polymer Addition on the Crystallite Size and Sinterability of Hydroxyapatite Prepared with CaO Powder and Phosphoric Acid," J. Ceramic Processing Research, 13(3) 243-247 (2012).
  • P. Sarin, S.–J. Lee, Z. D. Apostolov and W. M. Kriven, "Porous Biphasic Calcium Phosphate Scaffolds from Cuttlefish Bone," J. American Ceramic Society, 94[8] 2362-2370 (2011).
  • S.J. Lee, M.H. Lee, W.M. Kriven and N.S. Oh, "Sintering Behavior and Biocompatibility of Calcium Phosphates Fabricated by Cuttlefish Bone and Phosphoric Acid," Tissue Engineering and Regenerative Medicine, 7(5) 556-650 (2010).
  • W.M. Kriven, "Inorganic Polysialates or 'Geopolymers'," American Ceramic Society Bulletin, 89[4] 31-34 (2010).
  • N. Xie, J. L. Bell and W. M. Kriven, "Fabrication of Structural, Leucite Glass-Ceramics from Potassium-based Geopolymer Precursors," J. Amer. Ceram. Soc., 93[9] 2644-2649 (2010).
  • C. H. Rüscher, E. Mielcarek, W. Lutz, A. Ritzmann and W. M. Kriven, "Weakening of Alkali-Activated Metakaolin during Aging Investigated by the Molybdate Method and Infrared Absorption Spectroscopy," J. American Ceramic Society 93[9], 2585-2590 (2010).
  • P. Sarin, P. Driemeyer, R. P. Haggerty, D.-K. Kim, J. L. Bell and W. M. Kriven, "In-situ Studies of Oxidation of ZrB2 and ZrB2-SiC Composites at High Temperatures," J. European Ceramic Society, 30[11] Special Issue, 2375-2386 (2010).
  • R. P. Haggerty, P. Sarin, J-F. Berar, Z. Apostolov and W. M. Kriven, "Powder Diffraction by Fixed Incident Angle Reflection Using a Curved Position Sensitive Detector," Journal of Applied Crystallography, 43 560-569 (2010).
  • J.L. Bell, P.E. Driemeyer and W.M. Kriven, "Formation of Ceramics from Metakaolin-Based Geopolymers. Part II: K-Based Geopolymer," Journal of the American Ceramic Society 92[3], 607-615 (2009).
  • D. Zhu and W. M. Kriven, “Shear Induced Transformation and Plasticity in Enstatite,” J. Am. Ceram. Soc., accepted.
  • P. Sarin, R.P. Haggerty, W. Yoon, M. Knapp, A. Berghaeuser, P. Zschack, E. Karapetrova, N. Yang and W. M. Kriven, "A curved image-plate detector system for high-resolution synchrotron X-ray diffraction," Journal of Synchrotron Radiation 16, 273-282 Part 2 (2009).
  • J. L. Bell, P.E. Driemeyer and W. M. Kriven, "Formation of ceramics from metakaolin-based geopolymers: Part I - Cs-based geopolymer," Journal of the American Ceramic Society 92[1], 1-8 (2009).
  • J. L. Bell, P. Sarin, P. E. Driemeyer, R. P. Haggerty, P. J. Chupas and W. M. Kriven, “X-ray Pair Distribution Function Analysis of Potassium Based Geopolymer,” Journal of Materials Chemistry, J. Mater. Chem., 18 [48], 5974 - 5981 (2008).
  • M. Radovic, S. A. Speakman, L. F. Allard, E. A. Payzant, E. Lara-Curzio, W. M. Kriven, J. Lloyd, L. Fegely, N. Orlovskaya, “Thermal, Mechanical and Phase Stability of LaCoO3 in Reducing and Oxidizing Environments,” J. Power Sources, 184 77-83 (2008).
  • J. L. Bell, P. Sarin, J. L. Provis, R. P. Haggerty, P. E. Driemeyer, P. J. Chupas, J. S. J. van Deventer and W. M. Kriven, “Atomic Structure of a Cesium Aluminosilicate Geopolymer: A Pair Distribution Function Study,” Chemistry of Materials, 20 [14] 4768-4776 (2008).
  • V. Domnich, Y. Aratyn, W. M. Kriven and Y.Gogotsi, "Temperature Dependence of Silicon Hardness: Experimental Evidence of Phase Transformations," Reviews on Advanced Materials Science, 14 14-34 (2008).
  • R. P. Dillon, D.-K. Kim. J. E. R Tujillo, W. M. Kriven and M. L. Mecartney, “Creep Characteristics of Alumina, Nickel Aluminate Spinel, Zirconia Composites,” J. Materials Research, 23 [2] 556-564 (2008).
  • D. K. Kim and W. M. Kriven, “Processing and Characterization of Multiphase Ceramic Composites. Part III: Strong, Hard and Tough, High Temperature, Quadruplex and Quintuplex Composites,” J. Amer. Ceram. Soc., 91 [3] 799-805 (2008).
  • D. K. Kim and W. M. Kriven, “Processing and Characterization of Multiphase Ceramic Composites. Part II: Triplex Composites with a Wide Sintering Temperature Range,” J. Amer. Ceram. Soc., 91, [3] 793 – 798 (2008).
  • Ch.-H. Jung, S.-J. Lee, W. M. Kriven, J.-Y. Park and W.-S. Ryu, “A Polymer Solution Technique for the Synthesis of Nano-sized Li2TiO3 Ceramic Breeder Powders,” Journal of Nuclear Materials, 373 194-198 (2007).
  • D.-K. Kim and W. M. Kriven, “Processing and Characterization of Multiphase Ceramic Composites. Part I: Duplex Composites Formed In-Situ,” J. Amer. Ceram. Soc., 91 [3] 784-792 (2007).
  • D. Jia and W. M. Kriven, “Sintering Behavior of Gehlenite. Part II. Microstructure and Mechanical Properties” J Amer. Ceram. Soc., 90 [8] 2766-2770 (2007).
  • D. Jia, D.-K. Kim and W. M. Kriven, “Sintering Behavior of Gehlenite. Part I. Self-forming, Macro-/Mesoporous Gehlenite – Pore Forming Mechanism, Microstructure, Mechanical and Physical Properties,” J Amer. Ceram. Soc., 90 [6] 1760-1773 (2007).
  • G. L. Brennecka, D. A. Payne, P. Sarin J.-M. Zuo and W. M. Kriven, “Phase Transformations in the High Temperature Form of Pure and TiO2 -stabilized Ta2O5,” J. Am. Ceram. Soc., 90 [9] 2946-2953 (2007).
  • P. Sarin, W. Yoon, R. P. Haggerty, N. C. Bhorkar, C. Chiritsecu and W. M. Kriven, “Effect of Transition-metal-ion doping on High Temperature Thermal Expansion of 3:2 Mullite – An In-situ, High Temperature, Synchrotron diffraction Study,” J. Europ. Ceram. Soc., 28 353-365 (2007).
  • W. Yoon, P. Sarin and W. M. Kriven, “Growth of Textured Mullite Fibers using a Quadrupole Lamp Furnace,” J. Europ. Ceram. Soc., 28 455-463 (2007).
  • P. Duxson, S. W. Mallicoat G. C. Lukey, W. M. Kriven and J. S. J. van Deventer, “Effect of Alkali and Si/Al Ratio on the Development of Mechanical Properties of Metakaolin-based Geopolymers,” Colloids and Surfaces A-Physicochemical and Engineering Aspects, 292 8-20 (2007).
  • P. Sarin, W. Yoon, K. Kurkschat, P. Zschack and W. M. Kriven, “Quadrupole Lamp Furnace for In-situ High Temperature (up to 2050K) Synchrotron Powder X-ray Powder Diffraction Studies in Air,” Review of Scientific Instruments, vol 77 no. 093906 (2006).
  • P. Sarin, R. P. Haggerty, W. Yoon, K. Knapp, P. Zschack and W. M. Kriven, “Rapid, In-situ, Ultra-high Temperature Investigations of Ceramics using Synchrotron X-ray Diffraction,” Mechanical Properties and Performance on Engineering Cermamics and Composites II, Ceramic Engineering and Science Proceedings, Vol. 27, [2], 313-324 (2006).
  • W. M. Kriven, P. Sarin and L. F. Siah, “Phase Transformations in Rare Earth Niobates,” Solid→Solid Phase Transformations in Inorganic Materials ‘05. Edited by J. M. Howe, D. E. Laughlin, J. K. Lee, D. J. Srolovitz and U. Dahmen, Published by the TMS Society, 1023-1028, (2006).
  • W. M. Kriven, K. Jurkschat and L.-F. Siah, “High Temperature Phase Transformations in Dysprosium Titanate,” Solid →Solid Phase Transformations in Inorganic Materials ‘05. Edited by J. M. Howe, D. E. Laughlin, J. K. Lee, D. J. Srolovitz and U. Dahmen, Published by the TMS Society, 1015-1022, (2006).
  • D. K. Kim and W. M. Kriven, Oxide Laminated Composites with Aluminum Phosphate (AlPO4) and Alumina Platelets as Crack Deflecting Materials,” Composites Part B: Engineering, B37 509-514 (2006).
  • John L. Provis, Peter Duxson, Grant C. Lukey, Frances Separovic, Waltraud M. Kriven and Jannie S. J. van Deventer, “Modeling Speciation in Highly Concentrated Alkaline Silicate Solutions,” Industrial and Engineering Chemistry Research, 44 [23], 8899-8908 (2005).
  • P. Duxson, J. L. Provis, G. C. Lukey, S. W. Mallicoat, W. M. Kriven and J. S. J. van Deventer, “Understanding the Relationship between Geopolymer Composition, Microstructure and Mechanical Properties,” Colloids and Surfaces A – Physicochemical and Engineering Aspects, 269 [1-3] 47-58 (2005).
  • L. F. Siah, W. M. Kriven and J. Schneider,167. “In-situ, High-temperature Synchrotron Powder Diffraction Studies of Oxide Systems In Air Using A Thermal-image Furnace,” Measurement Science and Technology, 16 1291-1298 (2005).
  • W. M. Kriven and S. J. Lee, “Toughening of Mullite/Cordierite Laminates by Transformation Weakening of β-Cristobalite Interphases,” J. Am. Ceram. Soc., 88 [6] 1521-1528 (2005).
  • B. T. Lee and W. M. Kriven, “Microstructure and Indentation Fracture of Dysprosium Niobate,” J. Mater. Res., 20 [6] 1422-1427 (2005).
  • P. Duxson, G. C. Lukey, J. S. J. van Deventer, S. W. Mallicoat, W. M. Kriven, “Microstructural Characterization of Metakaolin-based Geopolymers,” Ceramic Transactions, vol. 165. Advances in Ceramic Matrix Composites X, edited by J. P. Singh, N. P. Bansal and W. M. Kriven 71-85 (2005).
  • M. Gordon, J. Bell and W. M. Kriven, “Comparison of Naturally and Synthetically-Derived, Potassium-Based Geopolymers,” vol. 165. Advances in Ceramic Matrix Composites X, edited by J. P. Singh, N. P. Bansal and W. M. Kriven 95-106 (2005).
  • K. Jurkschat, P. Sarin, L. F. Siah and W.M. Kriven, “In situ High Temperature Phase Transformations in Rare Earth Niobates,” Advances in X-ray Analysis, vol. 47 357-362 (2004).
  • S. W. Kwak, W. M. Kriven, M. Wallig and J. H. Choy, “Inorganic Delivery Vector for Intravenous Injection,” Biomaterials, 25 [28] 5995-6001 (2004).
  • W. M. Kriven, S. -Y. Kwak, M. A. Wallig and J.-H. Choy, “Bio-resorbable Nanoceramics for Gene and Drug Delivery,” Mater. Res. Bull. 29 [1] 33-37 (2004).
  • P. Sarin, V. L. Snoeyink, D. A. Lyttle and W. M. Kriven, “Iron Corrosion Scales: Model for Scale Growth, Iron Release and Colored Water Formation,” J. Environmental Engineering (ASCE) 130, [4], 364-373 (2004).
  • W. M. Kriven, L. F. Siah, M. Schmücker and H. Schneider, “High Temperature Microhardness of Single Crystal Mullite,” J. Amer. Ceram. Soc., 87 [5] 970-972 (2004).
  • D. K. Kim and W. M. Kriven, “Fibrous Monoliths of Mullite - AlPO4 and Alumina/YAG – Alumina Platelets,” Materials Sci. Eng., Part A, 380 [1-2] 237-244 (2004).
  • D. -K. Kim and W. M. Kriven, “Mullite (3Al2O3•2SiO2)–Aluminum Phosphate (AlPO4), Oxide, Fibrous Monolithic Composites,” J. Am. Ceram. Soc., 87 [5] 794-803 (2004).
  • P. Sarin, V. L. Snoeyink, J. Bebee, K. K. Jim, M. A. Beckett, W. M. Kriven and J. A. Clement, “Iron Release from Corroded Iron Pipes in Drinking Water Distribution Systems: Effect of Dissolved Oxygen,” Water Research, 38 [3] 1259-1269 (2004).
  • W. M. Kriven, K. Jurkschat, B. R. Johnson, W. Yoon and C. Chiritescu, “Fabrication and Grain Growth in YAG and Mullite Fibers,” Ceramic Transactions vol. 153, 27-45 (2003).
  • D. C. Comrie and W. M. Kriven, “Composite Cold Ceramic Geopolymer in a Refractory Application,” Ceramic Transactions vol. 153, 211-225 (2003).
  • W. M. Kriven, J. L. Bell and M.Gordon, “Microstructure and Microchemistry of Fully-Reacted Geopolymers and Geopolymer Matrix Composites,” Ceramic Transactions vol. 153, 227-250 (2003).
  • J. P. Schreckenbach, N. Meyer, G. Marx, B. -T. Lee and W. M Kriven, “Strontium Hafnate Phases by Anodic Spark Conversion,” Appl. Surf. Science, 205, 97-101 (2003).
  • M. H. Jilavi, W. M. Kriven, H. Chung and J. Mazumder, “Microstructure Characterization of Oxide Coatings Deposited by Pulsed Eximer Laser Ablation,” J. Mater. Res., 18 [7] 1623-1630 (2003).
  • M. Schmücker, H. Schneider and W. M. Kriven, “Indentation–Induced Amorphization of Mullite Single Crystals,” J. Amer. Ceram. Soc., 86 [10] 1821-1822 (2003).
  • “Mullite (3Al2O3•2SiO2)–Aluminum Phosphate Laminated Composite Fabricated by Tape Casting,” J. Am. Ceram. Soc. Communication, 86 [11] 1962-1964 (2003).
  • L. F. Siah, J. Schneider and W. M. Kriven, “In-situ, in Air, High Temperature Studies of Oxide Systems using the Thermal-Imaging Technique,” Advances in X-ray Analysis, vol. 46 264-269 (2003).
  • P. Sarin, J. A. Clement V. L. Snoeyink and W. M. Kriven, “Iron Release from Corroded Unlined Cast Iron Pipe: Effect of Ph, Alkalinity and Orthophosphates in a Soft New England Water,” J. American Water Works Association, 95, [11] 85-96, (2003).
  • S. -J. Lee and W. M. Kriven, “Fabrication of Low Thermal Expansion and Low Dielectric Ceramic Substrates by Control of Microstructure,” J. Ceramic Processing Research, 4 [3] 118-121 (2003).
  • M. W. Jung, J. Tao, W. M. Kriven and J. Schneider, "Preparation and Characterization of Praseodymium Calcium Manganate," Mater. Chem. Phys., 78 [3] 778-784 (2002).
  • Z. Xu, J. L. Shull, and W. M. Kriven, “Hot Stage Transmission Electron Microscopy Study of Phase Transformations in Hexacelsian (BaAl2Si2O8),” J. Mater. Res., 17 [6] 1287-1297 (2002).
  • J. W. Palko, A. Sayir, S. V. Sinogeikin, W. M Kriven and J. D. Bass, “Complete Elastic Tensor for Mullite (~2.5Al2O3•SiO2) to High Temperatures Measured from Textured Fibers,” J. Am. Ceram. Soc., 85 [8] 2005-2012 (2002).
  • W. M. Kriven, “Design of Oxide Composites with Debonding Interphases,” In "Advances in Ceramic Matrix Composites VII." Ceramic Transactions, Vol. 128, 69-88, published by the American Ceramic Society, Westerville, OH (2001).
  • H. Ledbetter, S. Kim, M. Dunn, Z. Xu, S. Crudele and W. M. Kriven, “Elastic Constants of Mullite Containing Alumina Platelets,” J. Europ. Ceram. Soc., 21 2569-2576 (2001).
  • B. R. Johnson, W. M. Kriven and J. Schneider, “Crystal Structure Development during Devitrification of Amorphous Mullite,” J. Europ. Ceram. Soc., 21 2541-2562 (2001).
  • B. R. Johnson and W. M. Kriven, “Crystallization Kinetics of Yttrium Aluminum Garnet (Y3Al5012),” J. Mater Res., 16 [6] 1795-1805 (2001).
  • H. Chung, M. H. Jilavi, T. P. Duffey, J. Mazumder and W. M. Kriven, "Microstructure of Nanocrystalline NbAl3/Al Microlaminated Thin Films Deposited by Pulsed Eximer Laser Ablation," J. Thin Solid. Films, 388[1-2] 101-106 (2001).
  • I. K. Cherian and W. M. Kriven, “Suspension Processing, Microstructure and Mechanical Properties of Alumina Platelet Reinforced 3Y-TZP,” Part. 1. Ceramic Bulletin, 80 [11] 60-67 (2001; Part 2. Ceramic Bulletin, 80 [12] 57-63 (2001).
  • P. Sarin, V. L. Snoeyink, J. Bebee, W. M Kriven and J. A. Clement, “Physico-Chemical Characteristics of Corrosion Scales in Iron Pipes,” Water Research, 35 [12] 2961-2969 (2001).
  • G. Brunauer, H. Boysen, F. Frey, T. Hansen and W. Kriven, “High Temperature Crystal Structure of a 3:2 Mullite from Neutron Diffraction Data,” Zeitschrift für Kristallographie, 216 284-290 (2001).
  • S. J. Lee and W. M. Kriven, “Toughened Oxide Composites Based on Porous Alumina Platelet Interphases,” J. Am. Ceram. Soc., 84 [4] 767-774 (2001).
  • J. W. Palko, S. V. Sinogeikin, Ali Sayir, W. M. Kriven and J. D. Bass, “Elastic Constants of Yttria (Y2O3) Monocrystals to High Temperatures,” J. Appl. Phys., 89 [12] 7791-7796 (2000).
  • J. P. Schreckenbach, D. Butte, G. Marx, B. R. Johnson and W. M. Kriven, “Electrosynthesis and Microstructural Characterization of Anodic VOx Films,” J. Mater. Res., 15 [7] 1483-1489 (2000).
  • W. M. Kriven, S. J. Lee, M. A. Gülgün, M. H. Nguyen and D. K. Kim, 120. “Synthesis of Oxide Powders via Polymeric Steric Entrapment,” in Innovative Processing/Synthesis: Ceramics, Glasses, Composites III. Ceramic Transactions, vol 108, 99-110 (2000).
  • S. J. Lee, M D. Biegalski and W. M. Kriven, “Powder Synthesis of Barium Titanate and Barium Orthotitanate via an Ethylene Glycol Polymerization Route,” J. Mater. Res., 14 [7] 3001-3006 (1999).
  • W. M. Kriven, J. Palko, S. Sinogeikin, J. D. Bass, A. Sayir, G. Brunauer, H. Boysen, F. Frey and J. Schneider, “High Temperature Single Crystal Properties of Mullite,” J. Europ. Ceram. Soc., 19 [13] 2529-2541 (1999).
  • J. K. R. Weber, B. Cho, A. D. Hixson, J. G. Abadie, P. C. Nordine, W. M. Kriven, B. R. Johnson and D. Zhu, “Growth and Crystallization of YAG and Mullite-Composition Glass Fibers,” J. Europ. Ceram. Soc., 19 [13] 2543-2550 (1999).
  • S.-J. Lee, E. A. Benson and W. M. Kriven, “Preparation of Portland Cement Components by PVA Solution Polymerization,” J. Am. Ceram. Soc. 82 [8] 2049-2055 (1999).
  • M. H. Nguyen, S. J. Lee and W. M. Kriven, “Synthesis of Oxide Powders via a Polymeric Steric Entrapment Precursor Route,” J. Mater. Res., 14 [8] 3417-3426 (1999).
  • M. A. Gülgün, M. H. Nguyen and W. M. Kriven, “Polymerized Organic-Inorganic Synthesis of Mixed Oxides,” J. Amer. Ceram. Soc., 82 [3] 556-560 (1999).
  • J. Schreckenbach, F. Schlottig, G. Marx, W. M. Kriven, O. O. Popoola, M. H. Jilavi and S. H. Brown, “Preparation and Microstructure Characterization of Anodic Spark Deposited Barium Titanate Films,” J. Mater. Res., 13 [4] 1437-1443 (1999).
  • Y. J. Kim and W. M. Kriven, “Crystallography and Microstructural Studies of Phase Transformations in Dysprosia (Dy2O3),” J. Mater. Res., 13 [10] 2920-2931 (1998).
  • D. H. Kuo and W. M. Kriven, “Fracture of Multilayer Oxide Composites,” J. Mater. Sci. and Eng. A241, 241-250. (1998).
  • S. J. Lee and W. M. Kriven, “Crystallization and Densification of Nano-size, Amorphous Cordierite Powder Prepared by a Solution-Polymerization Route,” J. Amer. Ceram. Soc., 81 [10] 2605-2612 (1998).
  • H. Ledbetter, S. Kim, S.D. Crudele and W. M. Kriven, “Elastic Properties of Mullite,” J. Am. Ceram. Soc., 81 [4] 1025-1028 (1998).
  • D. H. Kuo and W. M. Kriven, “Mechanical Behavior and Microstructure of SiC and SiC/TiB2 Ceramics,” J. European Ceramic Soc., 18, 51-57 (1998).
  • H. Chung, M. H. Jilavi, T. P. Duffey, J. Mazumder and W. M. Kriven, “Nanocrystalline NbAl3-Al Multilayer Thin Films Deposited by Eximer Laser Ablation,” Acta Scripta, 38 [3] 429-435 (1998).
  • O. O. Popoola and W. M. Kriven,“Phase Transformation in KNbO3 Perovskite Ceramic,” Philosphical Magazine Letters, 75 [1] 1-5 (1997).
  • S.-J. Lee, W. M. Kriven, J.-H. Park and Y.-S. Yoon, “Bonding Behavior of a Cu/CuO Thick Film on a Low-firing Ceramic Substrate,” J. Materials Research, 12 [9] 2411-2418 (1997) .
  • S. J. Lee, W. M. Kriven and H. M. Kim, “Shrinkage Free, Alumina-Glass, Dental Composites by Aluminum Oxidation,” J. Amer. Ceram. Soc., 80 [8] 2141-2147 (1997).
  • D. H. Kuo and W. M. Kriven, “A Strong and Damage-Tolerant Oxide Laminate,” J. Am. Ceram. Soc. 80 [9] 2421-2424 (1997).
  • C. M. Huang, C. Y. Yuh, M. Farooque, D. Zhu, Y. Xu and W. M. Kriven, “Properties and Microstructure of MoSi2 - β´ SiAlON Particulate Ceramic Composites,” J. Am. Ceram. Soc. 80 [12] 2837-2843 (1997). (Presented at 20th Annual Cocoa Beach Conf. and Exposition on Composites and Advanced Ceramics, Jan 7-11th 1996. Won second prize in the Poster Competition.)
  • C. M. Huang, D. Zhu, C. X. Dong, W. M. Kriven, R. Loh and J. Huang, “Carbon-Coated Glass Fiber Reinforced Cement Composites: I. Fiber Push-out and Interfacial Properties,” J. Am. Ceram. Soc. 80 [9] 2326-2332 (1997).
  • P. Müllner and W. M. Kriven, “On the Role of Deformation Twinning in Domain Reorganization and Reorientation in Ferroelastic Crystals,” J. Mater. Res., 7 1771-1776 (1997).
  • D. H. Kuo, W. M. Kriven and T. J. Mackin, “Control of Interfacial Properties Through Fiber Coatings: Monazite Coatings in Oxide/Oxide Composites,” J. Am. Ceram. Soc., 80 [12] 2987-2996 (1997).
  • S. Kim and W. M. Kriven, “Preparation, Microstructure and Mechanical Properties of Silicon Carbide - Dysprosia Composites,” J. Am. Ceram. Soc., 80 [12] 2997-3008 (1997).
  • C. M. Huang, W. T. Y. Ho, C. Y. Yuh, M. Farooque, D. Zhu and W. M. Kriven, “Tape Cast MoSi2/β´-SiAlON Composite Reinforced with SiC Monofilaments,” Ceramic Transactions 74 459-470 (1996) .
  • D. H. Kuo and W. M. Kriven, “Interface Properties of YPO4/Y3Al5O12 Systems: A Double Sandwich System and a Fiber Model Composite,” Ceramic Transactions 74 71-82 (1996).
  • I. K. Cherian, M. D. Lehigh, I. Nettleship and W. M. Kriven, “Stereological Observations of Mullite and Zirconia Matrix Composites,” J. Am. Ceram Soc., 79 [12] 3273-3281 (1996).
  • L. S. Tan, A. J. McHugh, M. A. Gülgün and W. M. Kriven, “Evolution of Mechano-Chemistry and Microstructure of a Calcium Aluminate - Polymer Composite. Part II. Mixing Rate Effects," J. Mater. Res. 11 [7] 1739-1747 (1996).
  • D. H. Kuo and W. M. Kriven, "Chemical Stability, Microstructure and Mechanical Behavior of LaPO4-containing Ceramics," J. Materials Science and Engineering A210 [1-2] ) 123-134 (1996).
  • C. M. Huang, D. Zhu, Y. Xu, W. M. Kriven and C. Y. Yuh, "SiCf/O´-SiAlON Composite: Properties and Oxidation Retained Properties," J. Materials Science and Engineering, A220 [1-2] 176-184 (1996).
  • W. M. Kriven, "Displacive Phase Transformations and Their Applications in Structural Ceramics," J. de Physique IV, Colloque C8 vol 5, pp C8-101-110 (1995).
  • B. R. Johnson, M. A. Gülgün and W. M. Kriven, “Chemically Bonded Ceramic Processing of Monocalcium Aluminate,” Ceramic Transactions 62 313-320 (1995).
  • D. H. Kuo and W. M. Kriven, “Characterization of Yttrium Phosphate and a Yttrium Phosphate/Yttrium Aluminate Laminate,” J. Amer. Ceram. Soc., Comm. 78 [11] 3121-3124 (1995).
  • M. A. Gülgün and W. M. Kriven, "A Simple Solution-Polymerization Route for Oxide Powder Synthesis," Ceramic Transactions vol. 62 57-66 (1995).
  • M. A. Gülgün, W. M. Kriven, L. S. Tan and A. J. McHugh, "Evolution of Mechano-chemistry and Microstructure of a Calcium Aluminate-Polymer Composite: Part I. Mixing Time Effects," J. Mater. Res. 10 [7] 1746-1755 (1995).
  • M. A. Gülgün, W. M. Kriven and O. O. Popoola, “XPS Study of Bonding Between Polyvinyl Alcohol and a Titanate Cross Coupling Agent,” J. Materials Research, 10 [6] 1565-1571 (1995).
  • Y. J. Kim and W. M. Kriven, “A Transmission Electron Microscopy Study on the Decomposition of Synthetic Hillebrandite (Ca2SiO4•H2O),” J. Materials Research, 10 [12] 3084 - 3095 (1995).
  • C. M. Huang, F. Xiong, Y. Xu , A. Zangvil and W. M. Kriven, “Laser Ablated Coatings on Ceramic Fibers for Ceramic Matrix Composites,” J. Materials Science and Engineering, A191 249-256 (1995).
  • C. M. Huang, D. Zhu, Y. Xu, T. Mackin and W. M. Kriven, “Interfacial Properties of SiC Monofilament Reinforced β´-SiAlON Composites,” J. Materials Science and Engineering, A201 159-168 (1995).
  • W. M. Kriven, J. L. Shull, W. D. Porter and C. A. Hubbard, “High Temperature Phase Transformation in Y4Al209, Gd4Al209 and Dy4Al209,” in Solid →Solid Phase Transformations in Inorganic Materials ’94,” 95-100 (1994).
  • I. K. Cherian and W. M. Kriven, “Fabrication by Colloidal Filtration of Alumina Platelet Reinforced 3Y-TZP: Mechanical Properties,” Ceramic Transactions 46 387-398 (1994) .
  • C. M. Huang, Y. Xu, D. Zhu, T. Machin and W. M. Kriven, “Interfacial Bonding and Friction in SiC Monofilament/ β´ SiAlON Composites,” Ceram. Trans., 46 815-826 (1994).
  • W. M. Kriven, “Twinning in Structural Ceramics,” (invited review paper) in Twinning in Advanced Materials. Edited by M. H. Yoo and M. Wuttig. Published by The Minerals, Metals and Materials Society (TMS), Warrendale , PA., 435-448 (1994).
  • Y. Xu, C. M. Huang, W. M. Kriven and A. Zangvil, “Residual -Si3N4 Inclusions in Ce-doped O´+β–SiAlON Composites,” J. Am. Ceram Soc. Comm., 77 [8] 223-2216 (1994).
  • C. M. Huang, Y. Xu, D. Zhu and W. M. Kriven, “Combustion Synthesized β´-SiAlON Composites Reinforced with SiC Monofilaments,” J. Materials Science and Engineering, A188 341-351 (1994).
  • C. M. Huang, D. H. Kuo, Y. J. Kim and W. M. Kriven, “Phase Stability of Chemically Derived Enstatite (MgSiO3) Powders,” J. Am. Ceram. Soc., 77 [10] 2625-2631 (1994).
  • M. A. Gülgün, O. O. Popoola and W. M. Kriven, “Chemical Synthesis and Characterization of Calcium Aluminate Powders,” J. Am. Ceram. Soc., 77 [2] 531-539 (1994).
  • I. K. Cherian and W. M. Kriven, “Processing and Mechanical Properties of Alumina Platelet Reinforced Zirconia,” Ceramic Transactions, 38 509-520, (1994).
  • T. I. Hou and W. M. Kriven, “Mechanical Properties and Microstructure of CaZrO3-Ca2SiO4 Composites,” J. Am. Ceram. Soc., 77 [1] 65-72 (1994).
  • Y.J. Kim and W. M. Kriven, “TEM Study of Synthetic Hillebrandite (Ca2SiO4•H2O),” J. Materials Research, 8 [11] 2948-2953 (1993).
  • O. O. Popoola, J. J. Cooper and W. M. Kriven, “Microstructural Investigation of Fracture-Initiating Nickel Sulfide Inclusions in Glass,” Cer. Eng. and Sci. Proc., 14 [3-4] 284-294 (1993).
  • I. Nettleship, K. G. Slavick, Y. J. Kim and W. M. Kriven, “Phase Transformations in Dicalcium Silicate. III: Effects of Barium on the Stability of Fine-grained α´L and α´H Phases,” J. Am. Ceram. Soc., 76 [10] 2628-2634 (1993).
  • J.A. Lewis and W. M. Kriven, “Microstructure-Property Relationships in Macro-Defect-Free Cement,” Mat. Res. Soc. Bull. Vol XVIII [3] pp 25-29 (1993).
  • I. Nettleship, J. L. Shull Jr. and W. M. Kriven, “Chemical Preparation and Phase Stability of Ca2SiO4 and Sr2SiO4 Powders,” J. European Ceramic Society, 11 291-298 (1993).
  • Y. J. Kim, I. Nettleship and W. M. Kriven, “Phase Transformations in Dicalcium Silicate. II: TEM Studies of Crystallography, Microstructures and Mechanisms,” J. Am. Ceram. Soc., 75 [9] 2407-2419 (1992).
  • I. Nettleship, K. G. Slavick, Y. J. Kim and W. M. Kriven, “Phase Transformations in Dicalcium Silicate. I: Fabrication and Phase Stability,” J. Am. Ceram. Soc., 75 [9] 2400-2406 (1992).
  • O.O. Popoola and W. M. Kriven, “Interfacial Structure and Chemistry in a Ceramic/Polymer Composite Material,” J. Materials Research 7 [6] 1545-1552 (1992).
  • C. J. Chan, W. M. Kriven and J. F. Young, “Physical Stabilization of the α to βTransformation in Dicalcium Silicate,” J. Am. Ceram. Soc., 75 [6] 1621-1627 (1992).
  • O. O. Popoola, W. M. Kriven and J. F. Young, “Microstructural and Microchemical Characterization of a Calcium Aluminate-Polymer Composite (MDF) Cement,” J. Am. Ceram. Soc., 74 [8] 1928-1933 (1991). Paper received the Brunauer Award of the American Ceramic Society.
  • O. O. Popoola, W. M. Kriven and J. F. Young, “High Resolution Electron Microscopy and Microchemical Characterization of a Polyvinyl Alcohol Acetate/Calcium Aluminate Composite (Macro Defect Free Cement),” J. Ultramicroscopy, 37, 318-325 (1991).
  • Y. J. Kim and W. M. Kriven, “TEM Characterization of Modulated Microstructures in CaO-Dy2O3 Solid Solutions,” J. Ultramicroscopy, 37, 351-361 (1991).
  • G. P. Wirtz, S. D. Brown and W. M. Kriven, “Ceramic Coatings by Anodic Spark Deposition,” Materials and Manufacturing Processes, 6 [1] 87-116 (1991).
  • W. M. Kriven, “Martensitic Toughening of Ceramics,” J. Mater. Sci. and Eng., A127, 249-255 (1990).
  • K. R. Venkatachari and W.M. Kriven, “Investigation of Plasma-Sprayed Dysprosia Coatings,” J. Am. Ceram. Soc., 72 [10] 2023-2026 (1989).
  • P. D. Jero and W. M. Kriven, “On the Formation and Properties of 2 Tb2O3•Al2O3,” J. Am. Ceram. Soc., 71 [11] C454-455 (1988) .
  • W. M. Kriven, “Possible Alternative Transformation Tougheners to Zirconia: Crystallographic Aspects,” J. Am. Ceram. Soc. 71 [12] 1021-1030 (1988).
  • C. J. Chan, W. M. Kriven and J. F. Young, “Analytical Electron Microscopic Studies of Doped Dicalcium Silicates,” J. Am. Ceram. Soc., 71 [9] pp. 713-719 (1988). Paper won the Brunauer Award of the American Ceramic Society, Cements Division (1988).
  • W. M. Kriven, C. J. Chan and E. A. Barinek, “Particle Size Effect of Dicalcium Silicate in a Calcium Zirconate Matrix,” Advances in Ceramics, 24A, pp. 145-155 (1988).
  • K. A. Koshkarian and W. M. Kriven, “Investigation of a Ceramic-Metal Interface Prepared by Anodic Spark Deposition,” J. de Physique 49, Suppl. [10] C5-213 to 217 (1988).
  • W. M. Kriven and S. H. Risbud, “Electron Diffraction of Precipitates at Copper-Cordierite Interfaces,” Materials Letters, [12], 471-474 (1985).
  • W. M. Kriven and S. H. Risbud, "Characterization of Copper-Ceramic Interfaces," Electronic Packaging Materials Science. Published by Materials Research Society, Pittsburgh. Vol 40, 323-328 (1985).
  • Y. Fu, A. G. Evans and W. M. Kriven, "Microcrack Nucleation in Ceramics Subject to a Phase Transformation," J. Amer. Ceram. Soc., 67 [9], 626-630 (1984) .
  • W. M. Kriven, "The Transformation Mechanism of Spherical Zirconia Particles in Alumina," Advances in Ceramics, 12, 64-77 (1984).
  • W. M. Kriven and E. Bischoff, "Anomalous Expansion in A1203- 15 vol.% (Zr0.5 Hf0.5 )O2," Advances in Ceramics, 12, 425-427 (1984).
  • M. Rühle and W. M. Kriven, "Stress-Induced Transformations in Composite Zirconia Ceramics," Berichte der Bunsegesellschaft fur Physikalische Chemie 87, 222-228 (1983) .
  • W. M. Kriven and J. A. Pask, "Solid Solution Range and Microstructures of Melt-Grown Mullite," J. Amer. Ceram. Soc., 66 [9], 649-654 (1983).
  • A. H. Heuer, N. Claussen, W. M. Kriven and M. Rühle, “The Stability of Tetragonal Zirconia Particles in Ceramic Matrices,” Journal of the American Ceramic Society, 65[12], 642-650 (1982) .
  • W. M. Kriven, “Martensite Theory and Twinning in Composite Zirconia Ceramics,” Advances in Ceramics 3 168-183 (1981).
  • W. M. Kriven, W. L. Fraser and S. W. Kennedy, “The Martensite Crystallography of Tetragonal Zirconia,” W. M. Kriven, W. L. Fraser and S. W. Kennedy, Advances in Ceramics 3, 82-97(1981).
  • A. G. Evans, N. Burlingame, M. Drory and W. M. Kriven, “Martensitic Transformations in Zirconia-Particle Size Effects and Toughening,” Acta Metallurgica 29, 447-456 (1981).
  • S. W. Kennedy and W. M. Kriven, “Topotaxial Decomposition of Calcite-Type KN03 Crystals,” Journal of Solid State Chemistry 33, 71-77 (1980).
  • S. W. Kennedy and W. M. Kriven, “Martensitic Transformation Cubic to Rhombohedral in Rubidium Nitrate,” Journal of Material Science 11, 1767-1769 (1976).
  • S. W. Kennedy and W. M. Kriven, “Surface Effects Before and After the Aragonite-Type to Calcite-like Transformation in Potassium Nitrate in Relation to Mechanism,” Journal of Material Science 7, 1092-1095 (1972).

Journal Editorships

  • Associate Editor of the Journal of Ceramic Science and Technology, published by the German Ceramic Society, Berlin, Germany (2017 - present)
  • Member of the Editorial Board of Revista Facultad de Ingenieria-REDIN, Journal of the University of Antioquia, Medellin, Colombia (2015 - present)

Conferences Organized or Chaired

  • Kriven has agreed to organize a symposium on Geopolymers at the International Congress on Ceramics (ICC10) July 14, 2024 at 8:00 am - July 19, 2024 and 5:00 pm EDT Hotel Bonaventure, Montreal, QC H5A 1E4 Canada

Research Honors

  • 2017 Mueller Award for Research in Ceramic Engineering (2017)
  • Brunauer Award (jointly with Dr. O.O. Popoola and Prof. J. F. Young) (1991)
  • Brunauer Award (jointly with Dr. C.J. Chan. and Prof. J.F. Young) (1988)

Recent Courses Taught

  • MSE 420 - Ceramic Materials & Properties
  • MSE 421 - Ceramic Processing